Program parametering

You can parameter Wen.Suite with OPTIONS/PARAMETERS menu. An indexed dialog box is displayed. You move within the 5 dialog boxes it contains when you click on the indexes.

I/ General parametering

Images dithering
It permits to choose the dithering method for the display of the images. The best way is Bayer 2x2 and it is temporarily the only one active. The greyscale mode woks in grey levels, this mode renders the best when you use 16 colors. The display with full colors is the quickest mode but the less esthetic, there is not any dithering applied to the images. At last, the best results come from the diffusion mode, but it is quite slow.

Display width
L'The display can be either adapt to the width of the main window or set to a predefinite value. With the use of a fixed value you can keep the original lay out (designed for 640 or 800 pixels wide screens) even onto a display which does not withstand it (ST HIGH for example). The modification of the display width is effective after a page loading.

Display mode
You can choose the model of a graphic card for the picture display. The tuning acts only on the images and has no effect on the text display. Please note taht this mode does not act for the images which have already be loaded, dithered and stored into the temporary cache. To make sure of the success of this tuning, you have to save the parameters, leave and then restart Wen.Suite.

II/ Display parametering

Colors by default
There is not yet an access to this option. Later, it enables to choose the color by default of the text, the background and the links.

Monochrom display
According to the tuning you have chosen, a more or less important part of the instructions for color and backgound is kept. The entire acceptance of attributes can brings out a black page or a white page ( or a page with some colored elements as same as the background) if the author of the page did not use some enough contrated colors. In this case, it may be better to scale down the display level then reload.
Take all the elements in effect: text, background, background pictures, links.
Not display the background pictures: if the dithering of the background picture brings out unreadable the text, you can disactive it this way.
Take in effect only BG-COLOR: if the colors of the text and background are tooclose, they will be the same ; with this option, only BG-COLORS is processed. The color of text and links is set to the opposite color.
Take in nothing effect: no attribute is taken in effect. The text is displayed in black on white background, with no background picture.

Colored background picture display
You can remove the background picture display if their dithering disturbs the well-reading og the page. As the 16 colors button is distinguished from the 256 colors buton (including the TRUE COLOR too), you can disactive the 16 colors background display while letting the 256 colors (or more) display active.
Besides, you can disactive the entire loading of the pictures with OPTIONS/CHARGEMENT-IMAGES.

Display size
The characters display can be preset in 5 sizes. The STD preset is in accordance with the browsers of the market. However, if you select a small size you can display more informations and this may be very useful for less than 640 pixels wide display. The 2 big sizes improves a lot the legibility : for a better graphic resolution or to make easier the web access to people whose eyes get hurt when they read for a long time a computer screen.

III/ Font parametering

Each of this pop-up set one of the 4 declensions of the standart text font. To change the title font and the non-proportional font, you just have to click on the correspondant box, thus some new pop-up appear.

Documentation follows

Introduction to Wen.Suite