| Internet-Draft | CDDL 2.0 | February 2024 |
| Bormann | Expires 30 August 2024 | [Page] |
The Concise Data Definition Language (CDDL) today is defined by RFC 8610 and RFC 9165. The latter (as well as some more application specific specifications such as RFC 9090) have used the extension point provided in RFC 8610, the control operator.¶
As CDDL is used in larger projects, feature requirements become known that cannot be easily mapped into this single extension point. Hence, there is a need for evolution of the base CDDL specification itself.¶
The present document provides a roadmap towards a "CDDL 2.0". It is based on draft-bormann-cbor-cddl-freezer, but is more selective in what potential features it takes up and more detailed in their discussion. It is intended to serve as a basis for prototypical implementations of CDDL 2.0. This document is intended to evolve over time; it might spawn specific documents and then retire or eventually be published as a roadmap document.¶
This note is to be removed before publishing as an RFC.¶
Status information for this document may be found at https://datatracker.ietf.org/doc/draft-bormann-cbor-cddl-2-draft/.¶
Discussion of this document takes place on the cbor Working Group mailing list (mailto:cbor@ietf.org), which is archived at https://mailarchive.ietf.org/arch/browse/cbor/. Subscribe at https://www.ietf.org/mailman/listinfo/cbor/.¶
Source for this draft and an issue tracker can be found at https://github.com/cbor-wg/cddl-2.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 30 August 2024.¶
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
(Please see abstract.)¶
Note that the existing extension point can be exercised for new features in parallel to the work described here. One such draft, [I-D.ietf-cbor-cddl-more-control], is planned to form the first set of specifications going forward from the CDDL-2 project together with [I-D.ietf-cbor-update-8610-grammar].¶
The rest of this introduction gives a rough overview over what could be the development plan for CDDL 1.1, 2.0, 2.5.¶
This section documents the status before IETF 119.¶
CDDL 1.1 milestone (documents technically complete, implemented):¶
"CDDL 1.1": [I-D.ietf-cbor-update-8610-grammar], Grammar fixes: Empty files (enabling CDDL 2), non-literal tags, errata fixes. To be submitted to IESG after addressing one more issue and a short final WGLC.¶
Parallel to CDDL 1.1: More control operators [I-D.ietf-cbor-cddl-more-control]: Additional control operators, another iteration like RFC 9165 before. Ready for WGLC.¶
CDDL 2.0 work:¶
Technically complete before IETF 119: CDDL 2.0: [I-D.ietf-cbor-cddl-modules]
(import/include directives, implemented).
Ready for WGLC.¶
Potentially, further directives to be added.
No proposals are ripe for specification; this work could go into a
second document constituting "CDDL 2.1" so we have the
well-understood import/include available now.¶
"CDDL 2.5":¶
To be done 2024: CDDL 2.5: Section 3 of the present document ("annotations", plus some functionality enabled by that). The requirements are reasonably well-understood; the specific form this takes needs to be worked out. Enables, e.g., Section 5 of [I-D.bormann-cbor-cddl-freezer] (co-occurrence).¶
Not on the main line of development, but important ancillary work:¶
(Informational, implemented): Section 6 (alternative representations) of [I-D.bormann-cbor-cddl-freezer]: CDDL-in-JSON format(s) for interchange of CDDL model information between tools.¶
(Informational, companion to [I-D.ietf-cbor-cddl-modules]): [I-D.bormann-cbor-rfc-cddl-models] (builds standard collection of referenceable models).¶
(BCP? Informational?): [I-D.bormann-cbor-draft-numbers] (BCP for handling assigned numbers during draft stage; can stay informational as the work described is completed and any reference to the document erased before a specification using it would be published).¶
Application-oriented literal e'' so diagnostic notation can refer
to named numbers that are specified in CDDL (makes use of [I-D.ietf-cbor-edn-literals],
implemented, see [enum-literals] for an introduction).¶
More explorative at this point:¶
(Standards-Track?) The remaining Section 2 of this document: application-oriented literals in CDDL mirroring the work in [I-D.ietf-cbor-edn-literals].¶
(Informational or Standards-Track?): [I-D.bormann-cbor-cddl-csv] (using CDDL to model CSV documents).¶
Important CBOR work that may be reflected in some CDDL extensions:¶
Evolving Extended Diagnostic Notation [I-D.ietf-cbor-edn-literals]. While EDN and CDDL are independent languages (with EDN rooted in JSON and CDDL in ABNF and Relax-NG), they are often used together, and developments in one may spawn parallel work in the other.¶
Common Deterministic Encoding (CDE) [I-D.ietf-cbor-cde] and related documents. These do define CDDL operators already, which may be sufficient for initial use; this might be extended once more experience has been gained.¶
Packed CBOR [I-D.ietf-cbor-packed]. CDDL already can be used to describe the original data item represented in a packed data item. Requirements for describing the latter have not yet been collected; there is some relation to transformation (Section 3.2) that might need to be explored.¶
The previous content of this section formed the basis for [I-D.ietf-cbor-update-8610-grammar], except for Section 2.1.¶
Incomplete, see Appendix A.1.¶
The basic (implicit) processing model for CDDL 1.0 applies a CDDL data model to a data item and returns a Boolean that indicates whether the data item matches that model ("validation").¶
Section 4 of [RFC9165] extends this model with named "features". A validation can indicate which features were used. Validation could also be parameterized with information about what features are allowed to be used, enabling variants (see Section 4 of [RFC9165] and [useful] for examples).¶
The cddl tool (Appendix F of [RFC8610]) also supports experimental
forms of "annotating" a validated data item with information about
which rules were used to support validation, currently entirely based on the
information that is in a standard CDDL 1.0 data model.
This leads to a more general concept of "annotation", where the data
model specification supports "annotating" the validated instance by
optionally supplying information in the model.
(The annotated result is a special case of a "post-schema validation
instance" [PSVI], here one where the data item itself is only
augmented, not changed, by the process.)¶
Annotations could in turn provide input to further validation steps, as is often done with Schematron validation in Relax-NG; with an appropriate evaluation language this can be used for checking co-occurrence constraints (Section 5 of [I-D.bormann-cbor-cddl-freezer]).¶
Finally, annotations are a first step to transformation, i.e., describing how a validated data item should be interpreted as a transformed data item by performing certain computations. This generally requires even more support from an evaluation language, simple transformations such as adding in default values may not need much support though.¶
At this time, existing experimental implementations do not lead to a clear choice for what processing model enhancements should be in CDDL 2.0 follow-ons. This document proposes to continue the experimentation and document good approaches.¶
The previous content of this section formed the basis for [I-D.ietf-cbor-cddl-modules]. Additional work might be started on the ideas outlined in the subsections of this section.¶
Many of the constructs defined here for CDDL also could be used with ABNF specifications. ABNF would definitely benefit from a standard way to import snippets from existing RFCs. Since CDDL contains ABNF support (Section 3 of [RFC9165]), it would be natural to make some of the functionality discussed in this section available for ABNF as well.¶
This document makes no requests of IANA.¶
This appendix contains sections that may not make it to a 2.0 milestone, but might be part of a followup.¶
Some CBOR tags often would be most natural to use in a CDDL spec with a literal syntax that is tailored to their semantics instead of the serialization of their tag content in CBOR. There is currently no way to add such syntaxes, no defined extension point either.¶
The specification "CBOR Extended Diagnostic Notation (EDN): Application-Oriented Literals, ABNF, and Media Type" [I-D.ietf-cbor-edn-literals] defines application-oriented literals, e.g., of the form¶
dt'2019-07-21T19:53Z'¶
for datetime items. With additional considerations for unambiguous syntax, a similar literal form could be included in CDDL.¶
This proposal opens a namespace for the prefix that indicates an
application specific literal.
A registry could be provided to turn this namespace into a genuine
extension point.
(This is currently the production bsqual in Appendix B of [RFC8610].)¶
The syntax provided in [I-D.ietf-cbor-edn-literals] does not enable the use of named CDDL rules — using it directly in CDDL would have the same flaw that is being fixed for tag numbers in Section 3.2 of [I-D.ietf-cbor-update-8610-grammar].¶
Often, a CDDL specification needs to import from specifications in a different language or platform.¶
In many cases, CDDL specifications make use of values that are
specified in IANA registries. The proposed .iana control operator can be
used to reference such a set of values.¶
The reference needs to be able to point to a draft, the registry of which has not been established yet, as well as to an established IANA registry.¶
An example of such a usage might be:¶
cose-algorithm = int .iana ["cose", "algorithms", "value"]¶
Unfortunately, the vocabulary employed in IANA registries has not been designed for machine references. In this case, the potential values would come from applying the XPath expression¶
//iana:registry[@id='algorithms']/iana:record/iana:value¶
to https://www.iana.org/assignments/cose/cose.xml, plus some
filtering on the records returned that only leaves actual allocations.
Additional functionality may be needed for filtering with respect to other
columns of the registry record, e.g., <capabilities> in the case of
this example.¶