Internet-Draft uas-sn-dns December 2023
Wiethuechter Expires 6 June 2024 [Page]
Workgroup:
drip Working Group
Internet-Draft:
draft-wiethuechter-drip-uas-sn-dns-01
Published:
Intended Status:
Standards Track
Expires:
Author:
A. Wiethuechter
AX Enterprize, LLC

UAS Serial Numbers in DNS

Abstract

This document describes a way Uncrewed Aerial System (UAS) Serial Numbers are placed into and retrieved from the Domain Name System (DNS). This is to directly support DRIP-based Serial Numbers.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 6 June 2024.

Table of Contents

1. Introduction

The lookup of Serial Number for Uncrewed Aerial Systems (UAS) is a major concern. On one hand if a pilot plans to use DRIP Entity Tags (DETs, [RFC9374]) or other Session IDs the Serial Number is considered, by many Civil Aviation Authorities (CAAs), PII.

However when this is not the case, the Serial Number can be used in the clear as the UAS ID, and generally will be by default.

It may be helpful for receiving devices or other devices presented with a UAS Serial Number to look up additional information of the aircraft, if the manufacturer wishes to provide it publicly. This information could be general specifications, such as number or props or color.

DRIP directly uses the [CTA2063A] Serial Number format as defined in [RFC9374] to encode a DET. A such a way to lookup a Serial Number to see if it corresponds to a DET is important and something that [detim] does not currently address.

This document adds support for UAS Serial Numbers in DNS. It creates two new roles: Manufacturer Code Authority (MCA) for RAAs and the Manufacturer Unmanned Aircraft Authority (MAA) role for HDAs. MCA is part of a new allocated range in RAA values as the conversion of Manufacturer Codes is across the entire HID.

1.1. Supported Scenarios

  1. UA using manufacturer generated Serial Number for UAS ID. No additional information provided.
  2. UA using manufacturer generated Serial Number for UAS ID. Manufacturer using a DIME. Manufacturer MUST provided pointer to additional information via DNS (even if null).
  3. UA using manufacturer generated Serial Number which is mapped to a DET by manufacturer for UAS ID. UA using manufacturer generated DET for Authentication. Manufacturer using a DIME. DIME MUST place public DET information into DNS (i.e. HI). DIME MUST provide mapping of Serial Number to DET in DNS. Manufacturer MUST provide pointer to additional information via DNS (even if null).
  4. UA using manufacturer generated DRIP enhanced Serial Number for UAS ID. UA using manufacturer generated DET for Authentication. Manufacturer using a DIME. DIME MUST place public information into DNS (i.e. HI) - either directly or as a mapping to a DET. DIME MUST provide pointer to additional information via DNS (even if null).
  5. UA using manufacturer generated Serial Number for UAS ID. UA using user generated DET for Authentication. User uses DIME with capability to publicly map Serial Number to a DET (via a USS). DIME MUST place public DET information into DNS (i.e. HI). DIME MUST provide mapping of Serial Number to DET in DNS. DIME MUST provide pointer to additional information via DNS (even if null).

2. Terminology

2.1. Required Terminology

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

2.2. Additional Definitions

This document makes use of the terms (PII, USS, etc.) defined in [RFC9153]. Other terms (DIME, Endorsement, etc.) are from [RFC9434], while others (RAA, HDA, etc.) are from [RFC9374].

3. DIME Roles

3.1. Manufacturer Code Authority (MCA)

An RAA-level DIME that hands out HDA values to participating Manufacturer's that hold an Manufacturer Code used in [CTA2063A] that is issued by ICAO.

To manage the large Manufacturer Code space (34 character set; 4 characters; 1,336,336 possible codes) a range of RAA values are set aside for the use case. These are the RAA values of 4000 (0x0FA0) up to 4095 (0x0FFF). This allows a single HDA for each Manufacturer Code.

See Section 3.2 for the HDA allocation of Manufacturer Codes under these RAAs.

  • Note: the upper RAAs in the range (4083 to 4095) are not used but are left reserved in this space for future action if required.

3.2. Manufacturer Unmanned Aircraft Authority (MAA)

An HDA-level DIME run by a manufacturer of UAS systems that participate in Remote ID. Stores UAS Serial Numbers under a specific Manufacturer Code (assigned to the manufacturer by ICAO).

A DET can be encoded into a Serial Number (see [RFC9374], Section 4.2) and this DIME MUST hold a mapping from the Serial Number to the DET and its artifacts.

4. Manufacturer Code Allocation

The first 4 characters of every UAS Serial Number represents the manufacturer and is known as the Manufacturer Code. The allocation of a specific RAA (out of MCA space) and HDA (i.e. HID) for a Manufacturer Code uses the following derivation:

mfr_int = base34_decode(mfr_code)
hid = (4000 << 14) + mfr_int
mfr_code = base34_encode(hid)

A character in a UAS Serial Number "shall include any combination of digits and uppercase letters, except the letters O and I, but may include all digits" [CTA2063A]. For HID determination, the character space [0-9,A-H,J-N,P-Z] is mapped to [0-34] to convert the 4 place Base34 Manufacturer Code to Base10 (Note this is different than the Base32 process in Section 4.2 of [RFC9374]).

5. Serial Number Registration

There are four ways a Serial Number can be registered and used by DRIP:

  1. As a clear-text string with additional information (Section 5.1)
  2. As a clear-text string mapped to a DET "post" generation by the manufacturer (for use in authentication) and additional information (Section 5.2)
  3. As a clear-text string mapped to a DET "post" generation by the user (via an HDA) (for use in authentication) and additional information (Section 5.3)
  4. As an encoding of an HI and associated DET by the manufacturer (for use in authentication) with additional information (Section 5.4)

5.1. Serial Method 1

This is where a UA is provisioned with a Serial Number by the manufacturer. The Serial Number is just text string, defined by [CTA2063A]. The manufacturer runs an Name Server delegated under the Serial Number apex and points to information using a DET RR (filling in only the Serial Number and URI fields).

    +-------------------+
    | Unmanned Aircraft |
    +--o---o------------+
       |   ^
   (a) |   | (b)
       |   |
*******|***|*****************************
*      |   |    DIME: MAA               *
*      |   |                            *
*      v   |             +----------+   *
*   +--o---o--+          |          |   *
*   |   DPA   o--------->o          |   *
*   +----o----+   (d)    |          |   *
*        |               |          |   *
*        | (c)           | DIA/RDDS |   *
*        v               |          |   *
*   +----o--------+      |          |   *
*   | Registry/NS |      |          |   *
*   +-------------+      |          |   *
*                        +----------+   *
*                                       *
*****************************************

(a) Serial Number,
    UA Information
(b) Success Code
(c) DET RR
(d) UA Information
Figure 1: Example DIME:MAA with Serial Number Registration

5.2. Serial Method 2

This is where a UAS is provisioned with a Serial Number and DET by the manufacturer enabling their devices to use [drip-auth] and provide additional information. A public mapping of the Serial Number to DET and all public artifacts MUST be provided by the manufacturer. The manufacturer MUST use an MAA for this task.

The device MAY allow the DET to be regenerated dynamically with the MAA.

    +-------------------+
    | Unmanned Aircraft |
    +--o---o------------+
       |   ^
   (a) |   | (b)
       |   |
*******|***|*****************************
*      |   |    DIME: MAA               *
*      |   |                            *
*      v   |             +----------+   *
*   +--o---o--+          |          |   *
*   |   DPA   o--------->o          |   *
*   +----o----+   (d)    |          |   *
*        |               |          |   *
*        | (c)           | DIA/RDDS |   *
*        v               |          |   *
*   +----o--------+      |          |   *
*   | Registry/NS |      |          |   *
*   +-------------+      |          |   *
*                        +----------+   *
*                                       *
*****************************************

(a) Serial Number,
    UA Information,
    Self-Endorsement: UA
(b) Success Code,
    Broadcast Endorsement: MAA on UA
(c) DET RR, PTR RR
(d) UA Information
Figure 2: Example DIME:MAA with Serial Number + DET Registration

5.3. Serial Method 3

This is where a UAS has a Serial Number (from the manufacturer) and the user (via a DIME) has a mechanism to generate and map a DET to the Serial Number after production. This can provide dynamic signing keys for DRIP Authentication Messages via [drip-auth] for UAS that MUST fly only using Serial Numbers. Registration SHOULD be allowed to any relevant DIME that supports it. A public mapping of the DET to the Serial Number SHOULD be provided.

    +-------------------+
    | Unmanned Aircraft |
    +--o---o------------+
       |   ^
   (a) |   | (b)
       |   |
*******|***|*****************************
*      |   |      DIME                  *
*      |   |                            *
*      v   |             +----------+   *
*   +--o---o--+          |          |   *
*   |   DPA   o--------->o          |   *
*   +----o----+   (d)    |          |   *
*        |               |          |   *
*        | (c)           | DIA/RDDS |   *
*        v               |          |   *
*   +----o--------+      |          |   *
*   | Registry/NS |      |          |   *
*   +-------------+      |          |   *
*                        +----------+   *
*                                       *
*****************************************

(a) Serial Number,
    UA Information,
    Self-Endorsement: UA
(b) Success Code,
    Broadcast Endorsement: DIME on UA
(c) DET RR
(d) UA Information
Figure 3: Example DIME with Serial Number + DET Registration

5.4. Serial Method 4

This is where a UAS manufacturer chooses to use the Serial Number scheme defined in [RFC9374] to create Serial Numbers, their associated DETs for [drip-auth] and provide additional information. This document RECOMMENDS that the manufacturer "locks" the device from changing its authentication method so identifiers in both the Basic ID Message and Authentication Message do not de-sync. The manufacturer MUST use an MAA for this task, with the mapping between their Manufacturer Code and the upper portion of the DET publicly available.

    +-------------------+
    | Unmanned Aircraft |
    +--o---o------------+
       |   ^
   (a) |   | (b)
       |   |
*******|***|*****************************
*      |   |    DIME: MAA               *
*      |   |                            *
*      v   |             +----------+   *
*   +--o---o--+          |          |   *
*   |   DPA   o--------->o          |   *
*   +----o----+   (d)    |          |   *
*        |               |          |   *
*        | (c)           | DIA/RDDS |   *
*        v               |          |   *
*   +----o--------+      |          |   *
*   | Registry/NS |      |          |   *
*   +-------------+      |          |   *
*                        +----------+   *
*                                       *
*****************************************

(a) Serial Number,
    UA Information,
    Self-Endorsement: UA
(b) Success Code,
    Broadcast Endorsement: MAA on UA
(c) DET RR
(d) UA Information
Figure 4: Example DIME:MAA with DRIP Serial Number Registration

6. Serial Numbers in DNS

This document specifies the creation and delegation to an apex organization (TBD) of the subdomain uas.arpa. To enable lookup of Serial Numbers a subdomains of sn.uas.arpa is maintained. All entries under sn.uas.arpa are to follow the convention found in Appendix A. This is to enable a singular lookup point for Serial Numbers for UAS.

Note that other subdomains under uas.arpa can be made to support other identifiers in UAS. The creation and use of other such other subdomains are out of scope for this document. The further use and creation of items under uas.arpa is the authority of the apex organization (which has been delegated control).

DETs MUST not have a subdomain in uas.arpa (such as det.uas.arpa) as they fit within the predefined ip6.arpa as they are IPv6 addresses as defined in [detim].

7. IANA Considerations

7.1. IANA DRIP Registry

7.1.1. Aircraft Information Registry

This document requests a new registry for aircraft information fields under the DRIP registry group.

Aircraft Information Fields:
list of acceptable keys to be used in UA Information during a UA registration to a DIME. Future additions to this registry are to be made through First Come First Served (Section 4.4 of [RFC8126]). The following values are defined:
Table 1
Key Name Type Description
length float length, in millimeters
width float width, in millimeters
height float height, in millimeters
constructionMaterial tstr materials, comma separated if multiple
color tstr colors, comma separated if multiple
serial tstr ANSI CTA 2063-A Serial Number
manufacturer tstr manufacturer name
make tstr aircraft make
model tstr aircraft model
dryWeight float weight of aircraft with no payloads
numRotors int Number of rotators
propLength float Length of props, in centimeters
numBatteries int  
batteryCapacity float in milliampere hours
batteryWeight float in kilograms
batteryVoltage float in volts
batteryChemistry tstr  
maxTakeOffWeight float in kilograms
maxPayloadWeight float in kilograms
maxFlightTime float in minutes
minOperatingTemp float in Celsius
maxOperatingTemp float in Celsius
ipRating tstr standard IP rating
engineType tstr  
fuelType tstr  
fuelCapacity float in liters
previousSerial tstr legacy serial number(s)

8. Security Considerations

TODO

9. References

9.1. Normative References

[detim]
Wiethuechter, A. and J. Reid, "DRIP Entity Tag (DET) Identity Management Architecture", Work in Progress, Internet-Draft, draft-ietf-drip-registries-14, , <https://datatracker.ietf.org/doc/html/draft-ietf-drip-registries-14>.
[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/info/rfc2119>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/info/rfc8174>.
[RFC9153]
Card, S., Ed., Wiethuechter, A., Moskowitz, R., and A. Gurtov, "Drone Remote Identification Protocol (DRIP) Requirements and Terminology", RFC 9153, DOI 10.17487/RFC9153, , <https://www.rfc-editor.org/info/rfc9153>.
[RFC9374]
Moskowitz, R., Card, S., Wiethuechter, A., and A. Gurtov, "DRIP Entity Tag (DET) for Unmanned Aircraft System Remote ID (UAS RID)", RFC 9374, DOI 10.17487/RFC9374, , <https://www.rfc-editor.org/info/rfc9374>.
[RFC9434]
Card, S., Wiethuechter, A., Moskowitz, R., Zhao, S., Ed., and A. Gurtov, "Drone Remote Identification Protocol (DRIP) Architecture", RFC 9434, DOI 10.17487/RFC9434, , <https://www.rfc-editor.org/info/rfc9434>.

9.2. Informative References

[CTA2063A]
"ANSI/CTA 2063-A Small Unmanned Aerial Systems Numbers", , <https://shop.cta.tech/products/small-unmanned-aerial-systems-serial-numbers>.
[drip-auth]
Wiethuechter, A., Card, S. W., and R. Moskowitz, "DRIP Entity Tag Authentication Formats & Protocols for Broadcast Remote ID", Work in Progress, Internet-Draft, draft-ietf-drip-auth-41, , <https://datatracker.ietf.org/doc/html/draft-ietf-drip-auth-41>.
[RFC8126]
Cotton, M., Leiba, B., and T. Narten, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 8126, DOI 10.17487/RFC8126, , <https://www.rfc-editor.org/info/rfc8126>.

Appendix A. UAS Serial Number FQDN

Apex: .sn.uas.icao.arpa.
Serial: MFR0ADR1P1SC00L
Manufacturer Code: MFR0
Length: A
ID: DR1P1SC00L
FQDN: dr1p1sc00l.a.mfr0.sn.uas.icao.arpa.

Appendix B. DNS Examples

B.1. Serial Method 1

@ORIGIN mfr0.uas-sn.arpa
example1.8 IN URI ( https://example.com/sn/EXAMPLE1 )

B.2. Serial Method 2

@ORIGIN mfr0.uas-sn.arpa
example2.8 IN PTR
6.5.d.7.7.6.b.4.2.1.1.9.e.c.3.f.5.0.7.f.2.7.8.e.3.3.0.0.1.0.0.2.ip6.arpa

@ORIGIN 7.f.2.7.8.e.3.3.0.0.1.0.0.2.ip6.arpa
6.5.d.7.7.6.b.4.2.1.1.9.e.c.3.f.5.0 IN DET
( 20010033e872f705f3ce91124b677d65 0 1 "MFR MFR0" "MFR08EXAMPLE2" ... )
6.5.d.7.7.6.b.4.2.1.1.9.e.c.3.f.5.0 IN HIP
( 5 20010033e872f705f3ce91124b677d65 ... )
6.5.d.7.7.6.b.4.2.1.1.9.e.c.3.f.5.0 IN URI
( https://example.com/sn/EXAMPLE2 )

B.3. Serial Method 3

@ORIGIN mfr0.uas-sn.arpa
example3.8 IN PTR
2.1.1.1.2.4.0.7.b.2.a.f.1.b.4.8.5.0.7.f.2.7.8.e.3.3.0.0.1.0.0.2.ip6.arpa

@ORIGIN 7.f.2.7.8.e.3.3.0.0.1.0.0.2.ip6.arpa
2.1.1.1.2.4.0.7.b.2.a.f.1.b.4.8.5.0 IN DET
( 20010033e872f70584b1fa2b70421112 0 1 "MFR MFR0" "MFR08EXAMPLE3" ...)
2.1.1.1.2.4.0.7.b.2.a.f.1.b.4.8.5.0 IN HIP
( 5 20010033e872f70584b1fa2b70421112 ... )
2.1.1.1.2.4.0.7.b.2.a.f.1.b.4.8.5.0 IN URI
( https://example.com/sn/EXAMPLE3 )

B.4. Serial Method 4

@ORIGIN mfr0.uas-sn.arpa
example4.8 IN PTR
e.0.3.0.5.3.a.2.5.2.5.f.a.8.a.b.5.0.7.f.2.7.8.e.3.3.0.0.1.0.0.2.ip6.arpa

@ORIGIN 7.f.2.7.8.e.3.3.0.0.1.0.0.2.ip6.arpa
e.0.3.0.5.3.a.2.5.2.5.f.a.8.a.b.5.0 IN DET
( 2001003fff800005ba8af5252a35030e 0 1 "MFR MFR0" "MFR08EXAMPLE4" ... )
e.0.3.0.5.3.a.2.5.2.5.f.a.8.a.b.5.0 IN HIP
( 5 2001003fff800005ba8af5252a35030e ... )
e.0.3.0.5.3.a.2.5.2.5.f.a.8.a.b.5.0 IN URI
( https://example.com/sn/EXAMPLE4 )

Author's Address

Adam Wiethuechter
AX Enterprize, LLC
4947 Commercial Drive
Yorkville, NY 13495
United States of America